Woven steel screen deck
Widely applicable, many meshes possible and a good open area. Wire, steel type and weave determine the service life.
Compare the different types of screen deck
Compare woven steel, harp, rubber, polyurethane and steel plate for open area, wear, noise and fastening. Then check which specification is available for your machine.
WovenLots of open areaHarpLess cakingRubber / PUWear and noise
The most commonly used specifications
This comparison provides general product information. Always check which specification is shown for your machine.
Harp screen
Loose wires can limit sticking in damp or sticky material. The specification must match the machine and deck position.
Rubber screen deck
Can reduce noise and impact and suits wear-sensitive applications. Usually has less open area than finely woven steel.
Polyurethane screen deck
Interesting for wear, modular systems and specific dewatering. Module size and mounting must match the machine.
Steel plate
Strong at high impact and coarse separation. Opening, sheet thickness and perforation pattern determine weight and sag.
Pay attention to this when comparing
Machine and deck position
Check for which machine and position the specification is listed in the catalogue.
Product specifications
Compare type, mesh, thread, material and fastening.
Exact dimensions
Check the production dimensions in the quotation with your machine before you agree.
Not sure about the type yet?
Send make, model, deck position and the specification you are viewing. We will contact you if additional information is required.